NEWS
Pulse electric fence principle
Hot：43 Date:2023-02-06
1. Electric Fence A brief description of the electric fence system is to set up a pulsed electric fence detector in the surrounding area of non-access channels to form an electric fence to prevent and manage. The electric fence system is the first line of defense of the security system and an important line of defense. It is responsible for the frontier community safety and security work. When someone illegally climbs over the wall or destroys it, if someone attempts to invade, he first sees a “high voltage hazard” warning sign hanging on the fence, giving a psychological sense of deterrence; secondly, the electric fence itself It is a tangible barrier. It is difficult to climb when installing an appropriate height and angle. When an intruder attempts to cross, the flexible fence does not provide support. If you attempt to cross, when you touch the electric fence, you will be given an electric shock to retreat and leave. Do not dare touch again. If forced to break through, the on-site electric fencing host will send a sound and light alarm signal to psychologically further strike the intruder and force it to abandon the invasion. At the same time, it will alert nearby employees to assist security personnel and handle the scene.
The electric fence host has two sets of signals: a group of on-site alarm sounds and light alarms, which will make the intruder more scared and give the intruder a great shock; the other set of signals is transmitted to the security room. The alarm host emits sound and light alarms, and at the same time, an accurate alarm point position is displayed on the keyboard, and can be linked with the monitoring system. The on-site real-time screen center of the surveillance area that jumps out of the invading area immediately informs the patrolling security personnel to rush to the scene. Handling alarm conditions; it can also be networked with other alarm systems to facilitate the improvement of the protection level.
2. Electric Fence Principle The system and the AC power grid are essentially different in that they use high-voltage pulses (5000-10000V) and low energy (less than 5 Joules) and emit a pulse signal per second (battery per second). It is not a constant blow and therefore does not pose a hazard to humans. After the power supply of the electric fence hosts, the pulse voltage is generated at the transmitter and applied to the front end of the electric fence through the high-voltage insulated wire. The pulse signal is transmitted from the beginning to the terminal along the wire of the electric fence. The loop formed by the high-voltage insulated wire is applied to the receiving end of the controller. If someone invades or destroys the front electric fence, the controller will issue an alarm and transmit the alarm signal to other security equipment systems. The schematic diagram is as follows:
冀公安网备: 13012302000474号